Menu
Your Cart

8.8 ELECTRO GALV STUD M16X200 WITH NUT AND WASHER

8.8 ELECTRO GALV STUD M16X200 WITH NUT AND WASHER
8.8 ELECTRO GALV STUD M16X200 WITH NUT AND WASHER
  • Stock: In Stock
  • Brand: ANCHORS DI
  • Model: RSEG16X200EL
  • SKU: RSEG16X200EL
  • UPC: 6009515875060
R 74.87
Ex Tax: R 65.10

8.8 ELECTRO GALV STUD M16X200

Explaining the difference between EN8 and 8.8 steel as indicted

8.8 is ISO 898–1 grading for Bolts and screws. It indicates a bolt/screw with tensile strength of minimum 800MPa and a yield strength of 80% of 800MPa = 640MPa. Depending on thickness these are either quenched and tempered or can also be used without Q&T provided they meet the hardness and tensile requirements.

EN8 is a medium carbon steel usually supplied untreated. EN8 has good tensile strength and is often used in applications such as: shafts, gears, stressed pins, studs, bolts, keys etc.

EN8 is a very popular grade and is readily machinable in any condition. It can be further surface-hardened to produce components with enhanced wear resistance, typically in the range 50-55 HRC through induction processes. It is also available in a free-machining versions, EN8DM and EN8M (212A42)

<Elements available in EN8:

  • Carbon 0.36-0.44%
  • Silicon 0.10-0.40%
  • Manganese 0.60-1.00%
  • Sulphur 0.050 Max
  • Phosphorus 0.050 Max

EN stands for European norms.

Write a review

Note: HTML is not translated!
Bad Good
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.