Menu
Your Cart

MINI TUNGSTEN CARB. CUTTER 3.2MM CYL. 3.2MM SHANK

MINI TUNGSTEN CARB. CUTTER 3.2MM CYL. 3.2MM SHANK
MINI TUNGSTEN CARB. CUTTER 3.2MM CYL. 3.2MM SHANK
  • Stock: In Stock
  • Brand: TORK CRAFT
  • Model: TC08335
  • Weight: 0.01kg
  • Dimensions: 120.00mm x 62.00mm x 10.00mm
  • SKU: TC08335
  • UPC: 6009515847210
R 35.36
Ex Tax: R 30.75
Tungsten carbide cutter - Ø 3.2mm - Cylindrical

The tungsten carbide cutter has greater edge retention when compared to a steel cutter and can be used for material removal, shaping and smoothing on hard materials.

The cutter can be used on the following materials:

  • Hardened and stainless steel
  • Cast iron
  • Non-ferrous metals
  • Fired ceramic
  • Wood
  • Plastic

QTY: 1

When shaping material, remove small amounts, instead of large chucks. This will increase the life of the cutter and apply less load on the rotary tool.

Fitting the tool bit

The shank is securely locked in place by fitting it in the corresponding collet or making use of a keyless chuck.

For improved accuracy, make use of a flexible shaft connected to the rotary tool.

Rotation speed:

Most rotary tools have the benefit to adjust the rotation speed. Many tool bits that fit in rotary tools have a maximum speed setting. This can normally be found on the packaging.

All materials react differently to speed and will need the tool bit to rotate slower. It is recommended to start using accessories on the slower speed first, before increasing the speed as needed.

The diameter of the tool bit fitted also determines the rotation speed. The larger the diameter, the slower the speed. If the speed is set too high, it could bend the shank/shaft resulting in injury.

At a glance
  • Allows for compact and accurate material removal and shaping
  • Fits standard collets
  • The PG Mini range combines utmost precision with the convenience of universal tools and guaranteed strength
consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection – clean and scratch free
  • Hearing protection – quality earmuffs
  • Dust masks – discard old and dirty masks
  • Gloves – for easy handling of material and hand protection
Wear Gloves Eye Protection Hearing Protection Dust Mask
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask
Specifications
Description Specification
Cylinder diameter Ø 3.2mm
Shank diameter Ø 3.2mm

 

Write a review

Note: HTML is not translated!
Bad Good
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.