Menu
Your Cart

CHUCK & KEY 1.0 - 13.0MM B16 TAPER

CHUCK & KEY 1.0 - 13.0MM B16 TAPER
CHUCK & KEY 1.0 - 13.0MM B16 TAPER
  • Stock: In Stock
  • Brand: TORK CRAFT
  • Model: CM13-1
  • Weight: 0.72kg
  • Dimensions: 21.00mm x 12.00mm x 6.00mm
  • SKU: CM13-1
  • UPC: 6009515829872
R 303.08
Ex Tax: R 263.55
13mm Drill Chuck with key

KEY CHUCK 1.0 - 13.0MM B1613mm Keyed chuck with B16 taper. A correct taper adapter may be required to fit the chuck to your machine application. This version is Metric Taper B16.

  • B16 taper
  • Opening capacity: 13mm
  • All metal construction
  • Chuck key included

 

 

 

Installation Info
Clean both tapers of all grease and grit. With the chuck jaws completely retracted into the chuck and using a thin piece of wood to protect the chuck nose, tap the chuck into place on the spindle/taper adaptor.

To remove chuck from arbor
Insert wedges between the back of the chuck and the shoulder of the arbor as shown in the picture on the right.

By tapping these wedges with a hammer or applying force in a bench vice, the wedges will force the chuck off the arbor shaft.

 

Arbor Explained
Description Spec
Taper type B16
Metric DIN
   Taper Ø LARGE  15.733 mm
   Taper Ø SMALL  14.50 mm
   Taper LENGTH 24.00 mm

Arbors explained 

Depending on your aplication, please purchase the correct arbor for this chuck.

13mm Drill Chuck with key
Description Spec
Chuck type Keyed, 13mm B16 taper
Screw thread B16 Taper
Capacity 1.0 - 13mm
Construction All Metal
Chuck key Included

Write a review

Note: HTML is not translated!
Bad Good
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.