Menu
Your Cart

OFFSET HOUSING KIT

OFFSET HOUSING KIT
OFFSET HOUSING KIT
OFFSET HOUSING KIT
OFFSET HOUSING KIT
OFFSET HOUSING KIT
OFFSET HOUSING KIT
OFFSET HOUSING KIT
  • Stock: In Stock
  • Brand: SOUBER TOOLS
  • Model: ST DBB-HK-O
  • Weight: 0.96kg
  • Dimensions: 345.00mm x 95.00mm x 70.00mm
  • SKU: ST DBB-HK-O
  • UPC: 5060082781834
R 2,087.65
Ex Tax: R 1,815.35

Souber ToolsDBB Morticer Accessories

Offset Adapter

Offset adapterThe DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and builders alike.

Highlights

Available as a complete kit, or as an upgrade for your standard morticer, this attachment has been developed for European-style rebated doors with off-centre lock mortices.

Using the same vertical bar & clamp system, the attachment has a side sliding shaft housing, so that mortices can be cut off-centre.

This flexibililty allows you to cut hinge recesses and the mortice for the strike plate on door frames less than 95mm thick.

Select the MORE INFO tab a see a step-by-step procedure on how to use the offset adapter.

Click to see the Jig

 

 

 

Kindly note:  The item comes with knobs instead of kip lever handles as shown

 

How to use the Offset Adapter

Mark-up door, including centre of faceplate.

 

Loosen top quick release lever by 30°

     

Clamp morticer on the door.

 

Insert shaft into housing.

     

Loosen bottom quick release lever by 30°.

 

Align the housing and shaft left or right to the required position E

     

Lock the bottom quick release lever.

 

Rest the lower housing slider against the bottom clamp.

     

Release the bottom clamp screw and move it so that part of the shaft crosses C. Now lock the lower clamp.

 

Move the housing up to the top clamp. Now loosen the top clamp.

     

Move the housing and top clamps together to position B.

 

Lock both the top clamp and quick release lever.
WARNING: Do not overtighten the top or bottom clamps. To do so will cause the sliders to bind.

     

Choose cutter to suit correct size of lock body, then screw the cutter onto shaft until tight.

 

1. Set depth stop.
2. Connect up power and drill.

     

Cut mortice in usual up and down motion.

 

1. Remove cutter with spanner provided.
2. To cut forend/faceplate release the top quick release lever by 30° and follow steps 9–16.

Fitting an off-centre lock

 

Write a review

Note: HTML is not translated!
Bad Good
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.