Annular/Broach/Weldon Shank
Brand: TORK CRAFT
Model: TCAC0001
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,168.52
Ex Tax:R 1,016.10
Brand: TORK CRAFT
Model: TCAC0002
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,333.43
Ex Tax:R 1,159.50
Brand: TORK CRAFT
Model: TCAC0004
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 53.71
Ex Tax:R 46.70
Brand: TORK CRAFT
Model: TCAC0005
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 57.21
Ex Tax:R 49.75
Out Of Stock
Brand: TORK CRAFT
Model: TCAC010
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 437.35
Ex Tax:R 380.30
Brand: TORK CRAFT
Model: TCAC014-2
Annular Cutters 55mm long
Annular Cutter: Ø 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 453.62
Ex Tax:R 394.45
Brand: TORK CRAFT
Model: TCAC016-2
Annular Cutters 55mm long
Annular Cutter: Ø 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 515.49
Ex Tax:R 448.25
Brand: TORK CRAFT
Model: TCAC018-1
Annular Cutters 30mm
Annular Cutter: Ø 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 411.01
Ex Tax:R 357.40
Brand: TORK CRAFT
Model: TCAC019-1
Annular Cutters 30mm
Annular Cutter: Ø 19
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 419.23
Ex Tax:R 364.55
Brand: TORK CRAFT
Model: TCAC024-2
Annular Cutters 55mm long
Annular Cutter: Ø 24
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 749.17
Ex Tax:R 651.45
Brand: TORK CRAFT
Model: TCAC027-2
Annular Cutters 55mm long
Annular Cutter: Ø 27
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 731.00
Ex Tax:R 635.65
Out Of Stock
Brand: TORK CRAFT
Model: TCAC028-1
Annular Cutters 30mm
Annular Cutter: Ø 28
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 584.20
Ex Tax:R 508.00