Grinding point - Ø 7mm - Cylindrical
The point is made of bonded Silicon Carbide and has a distinctive light green
colour.
It has a very high abrasive power and is mostly used on mineral based materials - stone,
porcelain, ceramic, glass etc.
Application - stone:
Engraving
Smooth..
Sanding drum mandrel - Ø 12.7mm
The mandrel is used with Ø 12.7mm sanding drums for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rus..
P240 Drum sanding sleeves - Ø 6.4mm
The Ø 6.4mm sanding drums are used for sanding and shaping wood, plastic and rubber.
Simply fit the sanding drum sleeves on the
TC08425 mandrel and tighten the screw to expand and hold the sleeve in place.
The sanding drums can also be used for rust..
Rotary flap grinding wheel - P120
For grinding and polishing metals, rubber and plastics.
Can be used on flat or contoured surfaces.
The flap sanding wheel can also be used for rust removal.
Grit: P120....
Spare part for TCMT001
Application:
This is a spare replacement on/off switch for the
TCMT001/a> rotary tool.
Spare parts for the TCMT001 rotary tool:
TCMT001-1
Plastic nose piece
TCMT001-10-11-12
Spindle locking mechanism
TCMT001-13
On-off swit..
Spare part for TCMT001
Application:
This is a spare replacement variable speed selector for the
TCMT001 rotary tool.
Spare parts for the TCMT001 rotary tool:
TCMT001-1
Plastic nose piece
TCMT001-10-11-12
Spindle locking mechanism
TCMT0..
Spare part for TCMT001
Application:
This is a spare replacement armature for the
TCMT001 rotary tool.
Spare parts for the TCMT001 rotary tool:
TCMT001-1
Plastic nose piece
TCMT001-10-11-12
Spindle locking mechanism
TCMT001-13
On-off..
Chuck for TCMT001 rotary tool
Application:
The chuck is used to replace the collet clamping system of the TCMT001 rotary
tool. The clamping range is Ø0.3-3.2mm.
TCMT001 accessories:
TCMT001DC
Drill chuck 0-3.2mm
TCMT001FS
Flexible shaft
..
Telescopic stand for TCMT001 rotary tool
Application:
The telescopic hanging hook stand is fitted to a desk clamp and it can be
adjusted in height. It is ideally used together with the flexible shaft (TCMT001FS).
The rotary tool is hung on the hook of the stand to keep the tool safely out
..
Engraver
Engraver: TCMT005
Application:
The engraver is supplied with two stencils. The stencils allow letters and
numbers to be accurately engraved on plastics and metals.
The engraver is
popularly used to engrave serial numbers or details on equipment.
The engraver's intensity can ..